Luminosity Field Services › Plug-In Solar
Plug-In Solar · Readiness & Storage

Plug-in solar,
screened before you spend.

Maryland law now allows one plug-in solar system up to 1,200 watts per meter — no permit, no utility approval. What it does require is the right outlet, the right circuit, the right size for how you actually use power, and a notification filed with your utility before you plug in. That's the visit.

Call 443-455-9797 See the two tiers

The honest numbers first

A 1,200W plug-in system in Maryland saves roughly $80–$200 a year — about $183 a year at the top end, if you use nearly everything it makes, while it makes it. Anyone promising more than that from plug-in solar alone is selling you something.

Two reasons it's capped: the law limits you to 1,200 watts per meter, and plug-in systems get no net metering and no renewable credits. Power you generate but don't use in that moment flows out through your meter unpaid — on some meters it can even be counted as usage. A 1,200W kit on a house that's empty all day can send more than half of what it makes straight to the grid for $0.

So the value isn't the kit. It's matching the kit to your home — right size, right circuit, right placement — and, if it fits, storing the midday surplus for the expensive evening hours. That's what we screen for.

Maryland's rules, in plain English

Plug-in solar is legal in Maryland under HB 1532 (Public Utilities §7-321). Four rules decide what you can plug in and what has to happen first — and they shape everything on this page.

One system, up to 1,200 watts per meter

The law caps plug-in solar at 1,200 watts per residential meter — one system per meter. Bigger than that isn't plug-in anymore; it's a permitted install, which is a different project.

391 watts or less: no listing required

Devices rated at or under 391 watts are exempt from the safety-listing requirement. Anything bigger must be listed by UL or an equivalent nationally recognized testing lab. We read the label before you spend money on the wrong kit.

Notify your utility — no approval, no fee

You must notify your utility before you plug in — the device, its safety features, and its max capacity. Notice is all it is: the utility cannot require approval and cannot charge a fee. Tier 1 files it with you.

The utility may require a disconnect switch

Your utility can require a disconnect switch on the system. It's the one hardware condition they can attach — if yours requires one, we quote it flat and install it to code as part of setup.

Two tiers

Tier 1

Plug-in readiness visit

Before you buy a kit — or before you plug in one you already bought.

  • Outlet & circuit check — the circuit can safely handle backfed load, breaker and wiring verified, dedicated-circuit guidance where needed
  • Meter check — how your meter treats power flowing back out, so a kit can't quietly raise your bill
  • Right-sizing — 400W, 800W, or the full 1,200W, matched to your daytime load, not the biggest box on the shelf
  • Placement & sun — balcony, patio, or yard placement checked for real sun, shading, and secure mounting
  • Utility notification filed — Maryland requires notice to your utility, with the device's safety features and max capacity, before installation. We prepare and file it with you
  • Renter / HOA check — what written landlord or association approval you need before anything goes up

You leave with a straight answer: buy this size, plug it in here, expect about this much — or don't buy one at all.

Tier 2

Storage + peak-hours setup

Add-on to Tier 1. Your bill problem isn't outages — it's that your utility charges the most for power right when the sun goes down. For homes losing midday power to the grid, on a time-of-use rate, or that want backup for critical loads.

  • Capture the waste — plug-in solar makes its power at noon, and if you're not using it then, most of it flows out through your meter unpaid. A plug-in battery catches that noon sun and holds it for the evening — cooking, the AC, the expensive peak hours — so your evening loads run on your own stored power instead. Without storage you use maybe a third of what your panels make; with it, almost all of it. Self-consumption typically goes from 30–40% to 85%+
  • Peak-hours screening — if you're on (or should switch to) a time-of-use rate, we check the actual peak/off-peak spread on your bill. In Maryland that spread can be thin — we'll tell you if arbitrage is worth it or not
  • Backup plan for critical loads — the battery's own outlets keep the fridge cold, the lights on, phones charged, Wi-Fi up, and a CPAP or other medical device running through the night — the stuff that actually matters at 2 AM. Loads are sized to the battery so they last the outage. Plug-in solar alone shuts down when the grid does; storage doesn't
  • Schedule configured — charge off-peak / from solar, discharge at peak, reserve set for outages — set up and tested, not left as a manual

Straight talk included: storage is sold on captured solar and backup, not on arbitrage alone — and a plug-in battery powers the loads plugged into it, never the whole house through a wall outlet. Whole-home backup is a $10,000 hardwired system with permits — a different product. This one pays you back every day the power is on.

Custom placement — when the balcony isn't the sunny spot

Most homes don't have a perfect south-facing railing. They have a sunny patch of yard, a patio edge, or a side yard that gets the light. That's a mounting problem, and mounting is our trade — we build ballasted racking on commercial rooftops for a living.

Ballasted ground frames

A low, tilted frame set on the ground and weighted with ballast — no footings, no concrete, no holes. It stays a movable plug-in system under Maryland law, and it comes up with you if you move. Tilt is set for Maryland sun, not a fixed one-size bracket.

Patio & side-yard stands

For slabs and pavers where a frame needs to sit flat and stay put through weather — weighted, level, and low enough to stay under most fence lines and HOA sight lines.

Ballasted canopies — patios & small gardens

Panels overhead on ballasted posts: a panel roof that shades patio seating or a small garden bed while it makes power from the same sunny spot. Held down by calculated ballast — no footings, no concrete, no holes — so it stays a movable plug-in system under Maryland law and comes up with you if you move. Spaced panels let dappled light through for garden plants that don't want full sun all day. And the engineering is honest: an overhead panel is a sail in a storm, so the ballast is calculated for wind uplift — the same discipline we use on commercial ballasted rooftops, scaled down. Not guessed, and not a kit bracket.

Built to your yard

Frame sized to your panels and your space, ballast calculated for wind — the same uplift discipline we use on commercial ballasted roofs, scaled down. Cable run to the outdoor outlet planned so there's no cord across a walkway.

Placement is quoted with the readiness visit: if the sunny spot needs a frame or a canopy, we spec it, price it flat, and build it as part of setup.

How it runs

  1. Intake call. Utility, meter type, where you're thinking of placing it, what runs in your home during the day, and whether you rent. Photos of your meter, panel, and the outlet area help.
  2. Readiness visit. Outlet, circuit, meter, and sun checked in person. Kit sized to your daytime load — smaller is often the smarter buy.
  3. Notification filed. Your utility gets the required notice with the device's safety certification and capacity before anything is plugged in.
  4. Setup & verify. Kit placed and plugged in, production confirmed on your monitoring, and — Tier 2 — battery schedule configured and tested through a peak window.

Questions we get

Is plug-in solar actually legal in Maryland?
Yes. Since July 1, 2026, Maryland law (HB 1532, §7-321) allows one portable plug-in system per residential meter, up to 1,200 watts. The device must be listed by UL or an equivalent testing lab — unless it's rated at 391 watts or less, which is exempt from the listing requirement. Your utility can't require approval or charge a fee — but you must notify them before installing, and the utility may require a disconnect switch.
Does my kit need to be UL listed?
Only if it's rated above 391 watts. Maryland exempts plug-in devices at 391 watts or less from the listing requirement; anything bigger must be listed by UL or an equivalent nationally recognized testing lab. We check the certification label on the readiness visit, before you've committed to a kit.
Will it power my home in an outage?
No — and nothing that plugs into a wall outlet legally can run a whole house in an outage. Anyone who tells you otherwise is lying to you. A compliant plug-in inverter shuts down when the grid goes down. That's what Tier 2 storage is for: a plug-in battery keeps the specific loads plugged into it running — fridge cold, lights on, phones charged, a CPAP through the night.
Do I get paid for extra power I send to the grid?
No. Plug-in systems are excluded from net metering and earn no renewable credits. Excess is unpaid — which is why sizing and storage matter more than panel count.
I'm a renter. Can I do this?
Often yes — the system is portable and plugs into a standard outlet. You may need written landlord or HOA approval, and the utility notification is still required. We check both on the visit.
My balcony is shaded and I have no railing. Is this still for me?
Often yes — that's what custom placement is for. A ballasted ground frame in the sunny part of the yard or on a patio keeps the system portable and plug-in, with no permanent structure. We check the spot, the sun, and the cable run to your outlet on the visit.
Why not just buy the biggest kit?
Because every watt you generate and don't use is worth $0. A 400W kit matched to a home that's occupied all day can return more, per dollar spent, than a 1,200W kit exporting half its output from an empty house.
Do you sell the kits or batteries?
We screen, size, file, and set up — and we'll point you at certified options that meet Maryland's requirements. If a kit needs electrical work beyond the outlet (a new circuit, a disconnect), that work is quoted separately and done to code.

Book a readiness visit

Call 443-455-9797 or book a consultation call below. Have handy: your utility name, a photo of your electric meter, and where you're thinking of placing the kit. Pricing is quoted flat per visit before we come out — no savings pitch, no placeholder prices.
Call 443-455-9797 All services Book a consultation call